[Federal Register Volume 65, Number 160 (Thursday, August 17, 2000)]
[Rules and Regulations]
[Pages 50148-50149]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 00-20956]
-----------------------------------------------------------------------
DEPARTMENT OF DEFENSE
48 CFR Parts 217, 219, 236, and Appendix I to Chapter 2
[DFARS Case 2000-D015]
Defense Federal Acquisition Regulation Supplement; North American
Industry Classification System
AGENCY: Department of Defense (DoD).
ACTION: Interim rule with request for comments.
-----------------------------------------------------------------------
SUMMARY: The Director of defense Procurement has issued an interim rule
amending the Defense Federal Acquisition Regulation Supplement (DFARS)
to convert programs based on the Standard Industrial Classification
system to the North American Industry Classification System, in
accordance with the final rule issued by the Small Business
Administration on May 15, 2000.
DATES: Effective date: October 1, 2000.
Comment date: Comments on the interim rule should be submitted in
writing to the address shown below on or before October 16, 2000 to be
considered in the formation of the final rule.
ADDRESSES: Interested parties should submit written comments to:
Defense Acquisition Regulations Council, Attn: Ms. Susan Schneider,
OUSD (AT&L)DP(DAR), IMD 3D139, 3062 Defense Pentagon, Washington, DC
20301-3062; telefax (703) 602-0350.
E-mail comments submitted via the Internet should be addressed to:
[email protected]
Please cite DFARS Case 2000-D015 in all correspondence related to
this rule. E-mail comments should cite DFARS Case 2000-D015 in the
subject line.
FOR FURTHER INFORMATION CONTACT: Ms. Susan Schneider, (703) 602-0326.
SUPPLEMENTARY INFORMATION:
A. Background
This interim rule amends the DFARS to convert programs based on the
Standard Industrial Classification (SIC) system to the North American
Industry Classification System (NAICS). The Small Business
Administration (SBA) issued a final rule at 65 FR 30836 on May 15,
2000, providing a new size standards listing that is based on NAICS
rather than SIC codes. The SBA rule requires Federal agencies to use
the new size standards, beginning October 1, 2000, to determine whether
a business is a small business concern. An interim rule amending the
Federal Acquisition Regulation was published at 65 FR 46055 on July 26,
2000, with an effective date of October 1, 2000, to establish policy
for use of the new size standards in Government acquisitions. This rule
makes corresponding changes to the DFARS.
This rule was not subject to Office of Management and Budget review
under Executive Order 12866, dated September 30, 1993.
B. Regulatory Flexibility Act
DoD does not expect this rule to have a significant economic impact
on a substantial number of small entities within the meaning of the
Regulatory Flexibility Act, 5 U.S.C. 601, et seq., because this rule
implements the final rule issued by SBA on May 15, 2000, and SBA has
certified that the impact of the change from SIC to NAICS on each
business will not be substantial. Therefore, DoD has not performed an
initial regulatory flexibility analysis. DoD invites comments from
small businesses and other interested parties. DoD also will consider
comments from small entities concerning the affected DFARS subparts in
accordance with 5 U.S.C. 610. Such comments should be submitted
separately and should cite DFARS Case 2000-D015.
C. Paperwork Reduction Act
The Paperwork Reduction Act does not apply because the rule does
not impose any information collection requirements that require the
approval of the Office of Management and Budget under 44 U.S.C. 3501,
et seq.
D. Determination To Issue an Interim Rule
A determination has been made under the authority of the Secretary
of Defense that urgent and compelling reasons exist to publish this
interim rule prior to affording the public an opportunity to comment.
The SBA issued a final rule on May 15, 2000, providing a new size
standards listing that is based on NAICS rather than SIC codes. The SBA
rule requires Federal agencies to use the new size standards, beginning
October 1, 2000, to determine whether a business is a small business
concern. An interim rule amending the Federal Acquisition Regulation
was published on July 26, 2000, with an effective date of October 1,
2000, to establish policy for use of the new size standards in
Government acquisitions. Corresponding changes to the DFARS are now
needed. The required implementation date of October 1, 2000, does not
permit time for issuance of a proposed rule and evaluation of public
comments. DoD will consider comments received in response to this
interim rule in the formation of the final rule.
List of Subjects in 48 CFR Parts 217, 219, and 236
Government procurement.
Michele P. Peterson,
Executive Editor, Defense Acquisition Regulations Council.
Therefore, 48 CFR Parts 217, 219, 236 and Appendix I to Chapter 2
are amended as follows:
1. The authority citation for 48 CFR parts 217, 219, 236, and
Appendix I to Subchapter I continues to read as follows:
Authority: 41 U.S.C. 421 and 48 CFR Chapter 1.
PART 217--SPECIAL CONTRACTING METHODS
217.401 [Amended]
2. Section 217.401 is amended as follows:
a. In paragraph (1)(i) by removing ``Standard Industrial
Classification (SIC) Major Group'' and adding in its place ``North
American Industry Classification System (NAICS) Industry Subsector'';
and
[[Page 50149]]
b. In paragraph (1)(ii) by removing ``SIC Major Group'' and adding
in its place ``NAICS Industry Subsector''.
PART 219--SMALL BUSINESS PROGRAMS
219.201 [Amended]
3. Section 219.201 is amended in paragraph (f) in the first
sentence by removing ``Standard Industrial Classification Major Group''
and adding in its place ``North American Industry Classification System
Industry Subsector''.
4. Section 219.502-3 is revised to read as follows:
219.502-3 Partial set-asides.
(c)(1) If the North American Industry Classification System
Industry Subsector of the acquisition is one in which use of a price
evaluation adjustment for small disadvantaged business concerns is
currently authorized (see FAR 19.201(b)), apply the adjustment to the
non-set-aside portion.
5. Section 219.1005 is amended by revising paragraph (b) to read as
follows:
219.1005 Applicability.
* * * * *
(b) The targeted industry categories for DoD are:
------------------------------------------------------------------------
North American Industry Classification System (NAICS) NAICS
Description Code
------------------------------------------------------------------------
(1) Pharmaceutical Preparation Manufacturing................. 325412
(2) Ammunition (except Small Arms) Manufacturing............. 332993
(3) Other Ordnance and Accessories Manufacturing............. 332995
(4) Turbine and Turbine Generator Set Unit Manufacturing..... 333611
(5)(i) Aircraft Engine and Engine Parts Manufacturing........ 336412
(ii) Research and Development in the Physical, 54171
Engineering, and Life Sciences (Aircraft Engines and
Engine Parts only)......................................
(6)(i) Guided Missile and Space Vehicle Manufacturing........ 336414
(ii) Research and Development in the Physical, 54171
Engineering, and Life Sciences (Guided Missiles and
Space Vehicles only)....................................
(7)(i) Other Guided Missile and Space Vehicle Parts and 336419
Auxiliary Equipment Manufacturing...........................
(ii) Research and Development in the Physical, 54171
Engineering, and Life Sciences (Guided Missile and Space
Vehicle Parts and Auxiliary Equipment only).............
(8) Military Armored Vehicle, Tank and Tank Component 336992
Manufacturing...............................................
(9) Search and Navigation System and Instrument Manufacturing 334511
(10)(i) Cellular and Other Wireless Telecommunications....... 513322
(ii) Satellite Telecommunications........................ 51334
(iii) Other Telecommunications........................... 51339
------------------------------------------------------------------------
219.1203 [Amended]
6. Section 219.1203 is amended in the first sentence by removing
``SIC Major Groups'' and adding in its place ``North American Industry
Classification System Industry Subsectors''.
PART 236--CONSTRUCTION AND ARCHITECT-ENGINEER CONTRACTS
236.602-1 [Amended]
7. Section 236.602-1 is amended as follows:
a. In paragraph (a)(i)(6)(A) introductory text in the last sentence
by removing ``Standard Industrial Classification Major Group'' and
adding in its place ``North American Industry Classification System
(NAICS) Industry Subsector''; and
b. In paragraph (a)(i)(6)(C) by removing ``Standard Industrial
Classification Major Group'' and adding in its place ``NAICS Industry
Subsector'', and by revising the second parenthetical to read ``(see
FAR 19.201(b))''.
Appendix I--Policy and Procedures for the DoD Pilot Mentor-Protege
Program
I-104 [Amended]
8. Section I-104 is amended in paragraph (a)(1)(ii) by removing
``Standard Industrial Classification (SIC)'' and adding in its place
``North American Industry Classification System (NAICS)''.
I-106 [Amended]
9. Section I-106 is amended in paragraph (c)(2)(ii) by removing
``SIC'' and adding in its place ``NAICS''.
I-107 [Amended]
10. Section I-107 is amended in paragraph (b)(2) by removing
``SIC'' both places it appears and adding in its place ``NAICS''.
[FR Doc. 00-20956 Filed 8-16-00; 8:45 am]
BILLING CODE 5000-04-M