[Federal Register Volume 66, Number 167 (Tuesday, August 28, 2001)]
[Rules and Regulations]
[Pages 45177-45187]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 01-21003]
=======================================================================
-----------------------------------------------------------------------
DEPARTMENT OF TRANSPORTATION
Research and Special Programs Administration
49 CFR Parts 107, 171, 172, 173, 175, 176, 177, 178, 179, 180
[Docket No. RSPA-01-10374 (HM-189S)]
RIN 2137-AD60
Hazardous Materials Regulations: Editorial Corrections and
Clarifications
AGENCY: Research and Special Programs Administration (RSPA), DOT.
ACTION: Final rule.
-----------------------------------------------------------------------
SUMMARY: This final rule corrects editorial errors, makes minor
regulatory changes, and, in response to requests for clarification,
improves the clarity of certain provisions in the Hazardous Materials
Regulations (HMR). The intended effect of this rule is to enhance the
accuracy and reduce misunderstandings of the HMR. The amendments
contained in this rule are minor editorial changes and do not impose
new requirements.
EFFECTIVE DATE: October 1, 2001.
FOR FURTHER INFORMATION CONTACT: Michael G. Stevens, Office of
Hazardous Materials Standards, (202) 366-8553, Research and Special
Programs Administration, U.S. Department of Transportation, 400 Seventh
Street, SW., Washington, DC 20590-0001.
SUPPLEMENTARY INFORMATION:
Background
RSPA (we) annually reviews the HMR to identify and correct errors.
Inaccuracies corrected in this final rule include typographical and
printing errors, incorrect references to other rules and regulations in
the CFR, inconsistent use of terminology, and misstatements of certain
regulatory requirements. In response to inquiries RSPA received
concerning the clarity of particular requirements specified in the HMR,
certain other changes are made to reduce uncertainties.
Because these amendments do not impose new requirements, notice and
public procedure are unnecessary. In addition, making these amendments
effective without the customary 30-day delay following publication will
allow the changes to appear in the next revision of 49 CFR.
The following is a section-by-section summary of the amendments
made under this final rule. It does not discuss all minor editorial
corrections (e.g., typographical, capitalization and punctuation
errors), changes to legal authority citations and certain other
[[Page 45178]]
minor adjustments to enhance the clarity of the HMR.
Section-by-Section Review
Part 107
Appendix A to Subpart D. The table in section II, Guidelines for
Civil Penalties, is revised to correct typographical errors and column
alignment for certain entries. No changes are made to baseline
assessment dollar amounts for penalties. Also, we are adding paragraph
designations to the corrected entries to facilitate our making
revisions to the table in the future. Paragraph designations will be
added to other entries as they are revised.
Part 171
Section 171.8. The definition of ``NPT'' is revised to remove an
outdated CFR reference. The definition ``Occupationally exposed hazmat
employee'' is removed. This term was exclusive to the Radiation
Protection Program which was withdrawn in a previous rulemaking. In the
definitions of ``P.s.i.'', ``P.s.i.g.'', and ``P.s.i.a.'', the
punctuated acronyms are removed for consistency with the changes made
in a previous rulemaking (RSPA Docket No. 01-9567 (HM-189R)) that
replaced these acronyms with their non-punctuated versions, i.e.,
``Psi'', ``Psia'', ``Psig'', throughout the HMR.
Section 171.15. In paragraph (b), the word ``Department'' is
replaced with the wording ``National Response Center'' to reflect the
correct name of the organization that receives incident notifications.
Part 172
Section 172.101. Table 1 of Appendix A to Sec. 172.101 is revised
to correct a typographical error and the subscript font in the
molecular formula of three entries.
Section 172.102. Special provision 44 is revised to remove an
outdated CFR reference and to correct the section reference for the
testing of flammable solids. Special provision B13 is revised to remove
outdated CFR references for certain cargo tank specifications.
Section 172.203. Paragraph (k) is revised to correct typographic
case. Paragraph (o)(3) is revised to correct the CFR reference for
samples of new self-reactive and organic peroxide materials.
Section 172.301. Paragraphs (a)(3) and (b) are revised to correct
grammatical and punctuation errors.
Section 172.512. The entire heading for paragraph (b) is
italicized.
Section 172.514. The entire heading for paragraph (c) is
italicized.
Section 172.604. Two new shipping names adopted in a previous
rulemaking (RSPA Docket No. 98-4185 (HM-215C); 64 FR 10742; March 5,
1999) are added to the list of materials excepted from emergency
response telephone number requirements.
Part 173
Section 173.2a. In paragraph (b), Note 1 following the hazard
precedence table is revised to refer readers to Sec. 173.127 for the
test criteria and Packing Group assignment for liquids in Division 5.1.
Section 173.4. Paragraph (a)(6) introductory text is revised to
remove reference to an obsolete note. In addition, in the note to
paragraph (a)(6), the heading is revised to correct typographic case.
Section 173.28. Paragraph (b)(7)(iv)(C) is revised to correct
typographic case.
Section 173.33. Paragraph (c)(1)(iii) is revised to correct a
punctuation error.
Section 173.34. In paragraph (d)(6), the spelling of the word
``pyroforic'' is revised for consistency with the spelling used in the
Sec. 172.101 Hazardous Materials Table. In addition, in paragraph
(e)(13) table, the superscript is corrected in certain entries.
Section 173.50. In the paragraph (b)(6) heading, ``Division 6.1''
is italicized.
Section 173.59. The definition of ``Cases, cartridge, empty with
primer'' is revised to clarify that the primer is the only explosive
component in the article.
Section 173.62. Paragraph (a) is revised to correct a CFR reference
cite. In addition, in the Table of Packing Methods, packaging
instruction ``137'' is revised to correct the format of the column
alignment.
Section 173.133. In paragraph (a)(2)(i), note 2 of the table is
revised to correct the CFR reference for annotating inhalation hazards
on shipping papers.
Section 173.166. In paragraph (a), the term ``seat-belt pre-
tensioner'' is italicized.
Section 173.181. Paragraph (a)(2) is revised to correct a CFR
reference.
Section 173.194. Paragraph (b)(1) is revised to correct a printing
error.
Section 173.249. The introductory text and paragraph (a) are
revised to correct typographic case and a printing error, respectively.
Section 173.301. Paragraph (d)(3) is revised to correct the
typographic case for ``difluoroethylene''.
Section 173.315. Paragraph (l)(6) is revised for minor
clarification.
Section 173.319. Paragraph (d)(2) table is revised to correct a CFR
reference.
Section 173.403. Two definitions are revised to correct a
punctuation error and to remove the italicizing from a word.
Sections 173.433 and 173.435. In these sections, 11 entries are
revised to correct miscellaneous typographical errors.
Section 173.469. In paragraph (c)(1)(v), the formula is corrected
by adding a degree symbol. In paragraphs (d)(1) and (d)(2), the title
of an International Organization for Standardization (ISO) publication
that is currently incorporated by reference in Sec. 171.7 is corrected.
Part 175
Section 175.30. Paragraphs (d)(1) and (d)(2) are revised to correct
punctuation errors.
Sections 175.31, 175.75, 175.90. These sections are revised to
correct grammatical and punctuation errors.
Part 176
Section 176.2. The definition ``Commandant'' is revised to correct
the title and office symbol for the Coast Guard office that is
responsible for handling the approval function.
Sections 176.30, 176.63, 176.74. These sections are revised to
correct miscellaneous typographical and punctuation errors.
Section 176.76. Paragraph (d) is revised to remove an obsolete CFR
reference. Paragraph (f)(2) is revised to correct the typographic case
for two general hazardous material terms.
Section 176.80. The section heading is revised by replacing the
word ``Application'' with ``Applicability'' for consistency with the
section headings used in the other modal parts of the HMR.
Section 176.83. Three paragraphs in this section are revised to
correct miscellaneous punctuation and printing errors.
Section 176.84. Paragraphs (a), (c)(1), (c)(2), and (c)(3) are
revised to correct typographic case. In addition, paragraph (c)(3) is
revised to correct a typographical error.
Sections 176.88, 176.95, 176.112. The section heading is revised by
replacing the word ``Application'' with ``Applicability'' for
consistency with the section headings used in the other modal parts of
the HMR.
Sections 176.133, 176.136, 176.137, 176.194. These sections are
revised to correct miscellaneous typographical and punctuation errors.
Section 176.210. A minor editorial revision is made for
clarification.
Section 176.340. This section is revised to correct the title and
office symbol for the Coast Guard office that is responsible for
handling the approval function. ]
Section 176.415. Paragraph (c)(4) is revised to correct a
typographical error.
[[Page 45179]]
Part 177
Section 177.840. Paragraph (e) is revised to correct a punctuation
and grammatical error.
Section 177.848. Paragraph (g)(3)(iv) is revised for minor
clarification.
Part 178
Section 178.35. Paragraph (f)(1)(iv) is revised to correct the
typographic case for wording used in the example.
Sections 178.36, 178.38, 178.39, 178.44. These sections are revised
to correct identical typographical errors.
Sections 178.45, 178.50, 178.51. These sections are revised to
correct miscellaneous typographical and printing errors.
Section 178.318-3. This section is revised to correct an outdated
CFR reference.
Section 178.813. Paragraphs (a) and (d) are editorially revised to
reverse the sequence for clarity.
Section 178.814. Paragraph (a) is editorially revised to reverse
the sequence for clarity.
Part 179
Section 179.2. The definition ``NPT'' is revised to correct a
typographical error.
Section 179.100. The introductory text is revised to correct a
typographical error.
Section 179.100-7. In paragraph (b) table, a note reference number
is corrected in the column 2 heading that was inadvertently not changed
when Note 6 was redesignated Note 4 in a previous rulemaking.
Sections 179.100-14 and 179.100-18. These sections are revised to
correct typographic case and punctuation errors.
Section 179.101. The section heading shown as ``Sec. 179.100'' is
corrected to read ``Sec. 179.101''.
Section 179.101-1. Note 6 of the table is revised to correct a
typographical error.
Section 179.102-4. Paragraph (a) is revised to correct a CFR
reference that was inadvertently not changed in a previous rulemaking
that redesignated other paragraphs in this section.
Section 179.103.5. Paragraph (b)(4) is revised to correct a
printing error.
Section 179.200-1. This section is revised to remove an obsolete
CFR reference.
Section 179.200-7. In paragraph (c) table, a note reference number
is corrected in the column 2 heading that was overlooked when Notes 4
and 5 were removed and Note 6 was redesignated as Note 4 in a previous
rulemaking. Paragraph (h) is revised to correct typographic case.
Sections 179.200-9, 179.200-11, 179.200-14, 179.201-3, 179.201-4,
179.201-6. These sections are revised to correct miscellaneous
typographic, printing, and punctuation errors.
Section 179.220-7. The paragraph (c) table is revised to remove
Notes 4 and 5 and redesignate Note 6 as Note 4. In addition, the
heading of column 2 is revised to redesignate Note 6 as Note 4. A
previous rulemaking removed the ASTM specification that corresponded to
Notes 4 and 5.
Sections 179.300-6, 179.400-4, 179.400-17, 179.500-3, 179.500-7,
179.500-18. These sections are revised to correct miscellaneous
typographic, printing, and punctuation errors.
Part 180
Section 180.352. Paragraph (b)(1) is editorially revised to reverse
the sequence for clarity.
Sections 180.415, 180.511, 180.519. These sections are revised to
make minor editorial corrections for clarity.
Regulatory Analyses and Notices
A. Executive Order 12866 and DOT Regulatory Policies and Procedures
This final rule is not considered a significant regulatory action
under section 3(f) of Executive Order 12866 and, therefore, was not
subject to review by the Office of Management and Budget. This rule is
not significant according to the Regulatory Policies and Procedures of
the Department of Transportation (44 FR 11034). Because of the minimal
economic impact of this rule, preparation of a regulatory impact
analysis or a regulatory evaluation is not warranted.
B. Executive Order 13132
This final rule has been analyzed in accordance with the principles
and criteria in Executive Order 13132 (``Federalism''). Federal
hazardous material transportation law, (49 U.S.C. 5101-5127) contains
express preemption provisions at 49 U.S.C. 5125.
RSPA is not aware of any State, local, or Indian tribe requirements
that would be preempted by correcting editorial errors and making minor
regulatory changes. This final rule does not have sufficient federalism
impacts to warrant the preparation of a federalism assessment.
C. Executive Order 13084
This rule has been analyzed in accordance with the principles and
criteria contained in Executive Order 13084 (``Consultation and
Coordination with Indian Tribal Governments''). Because this rule would
not significantly or uniquely affect the communities of the Indian
tribal governments, the funding and consultation requirements of this
Executive Order do not apply.
D. Regulatory Flexibility Act
I certify that this final rule will not have a significant economic
impact on a substantial number of small entities. This rule makes minor
editorial changes which will not impose any new requirements on persons
subject to the HMR; thus, there are no direct or indirect adverse
economic impacts for small units of government, businesses or other
organizations.
E. Unfunded Mandates Reform Act of 1995
This rule does not impose unfunded mandates under the Unfunded
Mandates Reform Act of 1995. It does not result in costs of $100
million or more to either State, local, or tribal governments, in the
aggregate, or to the private sector, and is the least burdensome
alternative that achieves the objective of the rule.
F. Paperwork Reduction Act
Under the Paperwork Reduction Act of 1995, no person is required to
respond to a collection of information unless it displays a valid OMB
control number. There are no new information collection requirements in
this final rule.
G. Regulation Identifier Number (RIN)
A regulation identifier number (RIN) is assigned to each regulatory
action listed in the Unified Agenda of Federal Regulations. The
Regulatory Information Service Center publishes the Unified Agenda in
April and October of each year. The RIN number contained in the heading
of this document can be used to cross-reference this action with the
Unified Agenda.
List of Subjects
49 CFR Part 107
Administrative practice and procedure, Hazardous materials
transportation, Packaging and containers, Penalties, Reporting and
recordkeeping requirements.
49 CFR Part 171
Exports, Hazardous materials transportation, Hazardous waste,
Imports, Reporting and recordkeeping requirements.
49 CFR Part 172
Education, Hazardous materials transportation, Hazardous waste,
Labeling, Markings, Packaging and
[[Page 45180]]
containers, Reporting and recordkeeping requirements.
49 CFR Part 173
Hazardous materials transportation, Packaging and containers,
Radioactive materials, Reporting and recordkeeping requirements,
Uranium.
49 CFR Part 175
Air carriers, Hazardous materials transportation, Radioactive
materials, Reporting and recordkeeping requirements.
49 CFR Part 176
Hazardous materials transportation, Maritime carriers, Radioactive
materials, Reporting and recordkeeping requirements.
49 CFR Part 177
Hazardous materials transportation, Motor carriers, Radioactive
materials, Reporting and recordkeeping requirements.
49 CFR Part 178
Hazardous materials transportation, Motor vehicle safety, Packaging
and containers, Reporting and recordkeeping requirements.
49 CFR Part 179
Hazardous materials transportation, Railroad safety, Reporting and
recordkeeping requirements.
49 CFR Part 180
Hazardous materials transportation, Motor carriers, Motor vehicle
safety, Packaging and containers, Railroad safety, Reporting and
recordkeeping requirements.
In consideration of the foregoing, 49 CFR Chapter I is amended as
follows:
PART 107--HAZARDOUS MATERIALS PROGRAM PROCEDURES
1. The authority for part 107 continues to read as follows:
Authority: 49 U.S.C. 5101-5127, 44701; Sec. 212-213, Pub. L.
104-121, 110 Stat. 857; 49 CFR 1.45, 1.53.
2. In Part 107, in Appendix A to Subpart D, in the table in section
II, the following entries are revised and designated to read as
follows:
Appendix A To Subpart D of Part 107--Guidelines for Civil Penalties
* * * * *
II. List of Frequently Cited Violations
----------------------------------------------------------------------------------------------------------------
Violation description Section or cite Baseline assessment
----------------------------------------------------------------------------------------------------------------
* * * * * *
*
----------------------------------------------------------------------------------------------------------------
PART 172--REQUIREMENTS
----------------------------------------------------------------------------------------------------------------
* * * * * *
*
Emergency Response Information Requirements
(Sec. 172.600-172.604):
1. Providing or listing incorrect 172.602..................
emergency response information with or
on a shipping paper.
a. No significant difference in ......................... $800.
response.
b. Significant difference in response ......................... $3,000 to $6,000.
2. Failure to include an emergency 172.604.................. $2,600.
response telephone number on a shipping
paper.
3. Failure to have the emergency response 172.604.................. $1,300.
telephone number monitored while a
hazardous material is in transportation
or listing multiple telephone numbers
(without specifying the times for each)
that are not monitored 24 hours a day.
4. Listing an unauthorized emergency 172.604.................. $2,600 to $4,200.
response telephone number on a shipping
paper.
5. Listing an incorrect or non-working 172.604.................. $1,300.
emergency response telephone number on a
shipping paper.
6. Failure to provide required technical 172.604.................. $1,300.
information when the listed emergency
response telephone number is contacted.
* * * * * *
*
----------------------------------------------------------------------------------------------------------------
PART 173--REQUIREMENTS
----------------------------------------------------------------------------------------------------------------
* * * * * *
*
Reconditioner Requirements (Sec. 173.28):
1. Representing, marking, or certifying a 173.28(c), (d)........... $6,000 to $10,800.
drum as a reconditioned UN standard
packaging, when the drum did not meet a
UN standard.
2. Marking an incorrect registration 173.28(b)(2)(ii).........
number on a reconditioned packaging.
a. Incorrect number.................. ......................... $800.
b. Use of another reconditioner's ......................... $7,200.
number.
3. Failure to properly conduct alternate 173.28(b)(2)(i)..........
leakage test.
a. Improper test..................... ......................... $2,000.
b. No test at all.................... ......................... $4,000.
4. Representing, marking, or certifying a 173.28(d)................ $500.
drum as altered from one standard to
another, when the drum had not actually
been altered.
* * * * * *
*
Offeror Requirements (Class 7--Radioactive
Materials):
1. Offering a DOT specification 7A 173.415(a), 173.461......
packaging without maintaining complete
documentation of tests and an
engineering evaluation or comparative
data.
a. Tests and evaluation not performed ......................... $8,400.
b. Complete records not maintained... ......................... $2,000 to $5,000.
2. Offering a Type B packaging without 173.471(a)...............
holding a valid NRC approval certificate.
[[Page 45181]]
a. Never having obtained one......... ......................... $2,500.
b. Holding an expired certificate.... ......................... $1,000.
3. Offering a limited quantity of 173.421(a)(4)............ $5,000 and up.
radioactive materials without marking
the inner (or single) packaging
``Radioactive''.
4. Offering low specific activity (LSA) 173.427(a)(6)............ $800.
radioactive materials consigned as
exclusive use without providing
instructions for maintenance of
exclusive use shipment controls.
5. Offering a package that exceeds the 173.441.................. $10,000 and up.
permitted limits for surface radiation
or transport index.
6. Offering a package without determining 173.443.................. $5,000 and up.
the level of removable external
contamination, or that exceeds the limit
for removable external contamination.
7. Storing packages of radioactive 173.447(a)............... $5,000 and up.
material in a group with a total
transport index more than 50.
8. Offering special form radioactive 173.476(a), (b).......... $2,500.
materials without maintaining a complete
safety analysis or Certificate of
Competent Authority.
* * * * * *
*
----------------------------------------------------------------------------------------------------------------
PART 178--REQUIREMENTS
----------------------------------------------------------------------------------------------------------------
Third-Party Packaging Certifiers (General):
1. Issuing a certification that directs 171.2(e), 178.2(b), $500 per item.
the packaging manufacturer to improperly 178.3(a), 178.503(a).
mark a packaging (e.g., steel drum to be
marked UN 4G).
Manufacturers (General):
1. Failure to insure a packaging 178.601(b)...............
certified as meeting the UN standard is
capable of passing the required
performance testing.
a. Packing Group I (includes Section ......................... $10,800.
172.504 table 1 materials).
b. Packing Group II.................. ......................... $8,400.
c. Packing Group III................. ......................... $6,000.
2. Certifying a packaging as meeting a UN 178.601(d)...............
standard when design qualification
testing was not performed.
a. Packing Group I (includes Section ......................... $10,800.
172.504 table 1 materials).
b. Packing Group II.................. ......................... $8,400.
c. Packing Group III................. ......................... $6,000.
3. Failure to conduct periodic retesting 178.601(e)............... $2,000 to $10,800.
on UN standard packaging (depending on
length of time and Packing Group).
4. Failure to properly conduct testing
for UN standard packaging (e.g., testing
with less weight than marked on
packaging; drop testing from lesser
height than required; failing to
condition fiberboard boxes before design
test).
a. Design qualification testing...... 178.601(d)............... $2,000 to $10,800.
b. Periodic retesting................ 178.601(e)............... $500 to $10,800.
5. Marking, or causing the marking of, a 178.2(b), 178.3(a), $7,200.
packaging with the symbol of a 178.503(a)(8)..
manufacturer or packaging certifier
other than the company that actually
manufactured or certified the packaging.
6. Failure to maintain testing records... 178.601(l)...............
a. Design qualification testing...... ......................... $1,000 to $5,000.
b. Periodic retesting................ ......................... $500 to $2,000.
7. Improper marking of UN certification.. 178.503.................. $500 per item.
8. Manufacturing DOT specification 171.14...................
packaging after October 1, 1994 that is
not marked as meeting a UN performance
standard.
a. If packaging does meet DOT ......................... $3,000.
specification.
b. If packaging does not meet DOT ......................... $6,000 to $10,800.
specification.
Manufacturing Requirements--Drums:
1. Failure to properly conduct production
leakproofness test.
a. Improper testing.................. 178.604(b)(1)............ $2,000.
b. No testing performed.............. 173.28................... $2,000 to $10,800.
Manufacturing Requirements--Cylinders:
1. Manufacturing, representing, marking, Various.................. $7,500 to $15,000.
certifying, or selling a DOT high-
pressure cylinder that was not inspected
and verified by an approved independent
inspection agency.
2. Failure to have a registration number Various.................. $800.
or failure to mark the registration
number on the cylinder.
3. Marking another company's number on a Various.................. $7,200.
cylinder.
4. Failure to mark the date of 178.65................... $3,000.
manufacture or lot number on a DOT-39
cylinder.
5. Failure to have a chemical analysis Various.................. $5,000.
performed in the US for a material
manufactured outside the US/failure to
obtain a chemical analysis from the
foreign manufacturer.
6. Failure to meet wall thickness Various.................. $7,500 to $15,000.
requirements..
7. Failure to heat treat cylinders prior Various.................. $5,000 to $15,000.
to testing.
8. Failure to conduct a complete visual Various.................. $2,500 to 6,200.
internal examination.
9. Failure to conduct a hydrostatic test, Various.................. $2,500 to 6,200.
or conducting a hydrostatic test with
inaccurate test equipment.
[[Page 45182]]
10. Failure to conduct a flattening test. Various.................. $7,500 to $15,000.
11. Failure to conduct a burst test on a 178.65(f)(2)............. $5,000 to $15,000.
DOT-39 cylinder.
12. Failure to have inspections and Various.................. $7,500 to $15,000.
verifications performed by an inspector.
13. Failure to maintain required Various..................
inspector's reports.
a. No reports at all................. ......................... $5,000.
b. Incomplete or inaccurate reports.. ......................... $1,000 to $4,000.
* * * * * *
*
----------------------------------------------------------------------------------------------------------------
PART 171--GENERAL INFORMATION, REGULATIONS, AND DEFINITIONS
3. The authority citation for part 171 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Sec. 171.8 [Amended]
4. In Sec. 171.8, make the following changes:
a. In the definition ``NPT'', the wording ``See Sec. 171.7(d)(12)''
is removed and ``See Sec. 171.7'' is added in its place.
b. The definition ``Occupationally exposed hazmat employee'' is
removed.
c. In the definition of ``P.s.i. or Psi'', the wording ``P.s.i. or
Psi'' is removed and the word ``Psi'' is added in its place.
d. In the definition of ``P.s.i.a. or psia'', the wording
``P.s.i.a. or psia'' is removed and the word ``Psia'' is added in its
place.
e. In the definition of ``P.s.i.g. or psig'', the wording
``P.s.i.g. or psig'' is removed and the word ``Psig'' is added in its
place.
Sec. 171.11 [Amended]
5. In Sec. 171.11, in paragraph (d)(13), the wording ``requirements
of Secs. 172.203(1)'' is removed and the wording ``requirements of
Secs. 172.203(l)'' is added in its place.
Sec. 171.15 [Amended]
6. In Sec. 171.15, in paragraph (b) introductory text, in the third
sentence, the word ``Department'' is removed and the wording ``National
Response Center'' is added in its place.
PART 172--HAZARDOUS MATERIALS TABLE, SPECIAL PROVISIONS, HAZARDOUS
MATERIALS COMMUNICATIONS, EMERGENCY RESPONSE INFORMATION, AND
TRAINING REQUIREMENTS
7. The authority citation for part 172 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
8. In Appendix A to Sec. 172.101, in Table 1 to Appendix A, in
column 1, make the following changes:
a. The term ``p-Phenylenedimine'' is removed and ``p-
Phenylenediamine'' is added in its place.
b. The term ``Vanadium oxide V205'' is removed and ``Vanadium oxide
V2O5'' is added in its place.
c. The term ``Zinc cyanide Zn(CN)2'' is removed and ``Zinc cyanide
Zn(CN)2'' is added in its place.
d. The term ``Zinc phosphide Zn3P2'' is removed and ``Zinc
phosphide Zn3P2'' is added in its place.
9. In Sec. 172.102, in paragraph (c)(1), Special provision 44, and
in paragraph (c)(3), paragraph a. in Special provision B13, are revised
to read as follows:
Sec. 172.102 Special provisions.
* * * * *
(c) * * *
(1) * * *
Code/Special Provisions
* * * * *
44 The formulation must be prepared so that it remains
homogenous and does not separate during transport. Formulations with
low nitrocellulose contents and neither showing dangerous properties
when tested for their ability to detonate, deflagrate or explode
when heated under defined confinement by the appropriate test
methods and criteria in the UN Recommendations, Tests and Criteria,
nor classed as a Division 4.1 (flammable solid) when tested in
accordance with the procedures specified in Sec. 173.124 of this
subchapter (chips, if necessary, crushed and sieved to a particle
size of less than 1.25 mm) are not subject to the requirements of
this subchapter.
* * * * *
(3) * * *
Code/Special Provisions
* * * * *
B13 * * *
a. Packagings equivalent to MC 306 cargo tanks are excepted from
the certification, venting, and emergency flow requirements of the
MC 306 specification.
* * * * *
Sec. 172.203 [Amended]
10. In Sec. 172.203, make the following changes:
a. In paragraph (k) introductory text, in the first sentence, the
word ``table'' is removed and the word ``Table'' is added in its place.
b. In paragraph (k) introductory text, in the last sentence, the
word ``Column'' is removed and the word ``column'' is added in its
place.
c. In paragraph (o)(3), the wording ``(see Sec. 173.224(c)(4) of
this subchapter) or Division 5.2 (organic peroxide) material (see
Sec. 173.225(c)(4) of this subchapter)'' is removed and the wording
``(see Sec. 173.224(c)(3) of this subchapter) or Division 5.2 (organic
peroxide) material (see Sec. 173.225(c)(2) of this subchapter)'' is
added in its place.
Sec. 172.301 [Amended]
11. In Sec. 172.301, make the following changes:
a. In paragraph (a)(3) introductory text, the wording ``specified
in the Secs. 172.332 or 172.336,'' is removed and the wording
``specified in Sec. 172.332 or Sec. 172.336,'' is added in its place.
b. In paragraph (b) heading, the word ``Technica1'' is removed and
the word ``Technical'' is added in its place.
Sec. 172.512 [Amended]
12. In Sec. 172.512, in paragraph (b) heading, the wording ``(640
cubic feet)'' is removed and the wording ``(640 cubic feet)'' is added
in its place.
13-14. In Sec. 172.604, in paragraph (c)(2), two shipping names are
added in the appropriate alphabetical sequence to read as follows:
Sec. 172.604 Emergency response telephone number.
* * * * *
(c) * * *
(2) * * *
Vehicle, flammable gas powered
Vehicle, flammable liquid powered
* * * * *
PART 173--SHIPPERS--GENERAL REQUIREMENTS FOR SHIPMENTS AND
PACKAGINGS
15. The authority citation for part 173 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127, 44701; 49 CFR 1.45, 1.53.
[[Page 45183]]
16. In Sec. 173.2a, note \1\ following paragraph (b) table is
revised to read as follows:
---------------------------------------------------------------------------
\1\ See Sec. 173.127.
---------------------------------------------------------------------------
Sec. 173.2a Classification of a material having more than one hazard.
* * * * *
(b) * * *
Precedence of Hazard Table
[Hazard class and packing group]
------------------------------------------------------------------------
-------------------------------------------------------------------------
* * * * *
------------------------------------------------------------------------
\1\ See Sec. 173.127.
* * * * *
Sec. 173.4 [Amended]
17. In Sec. 173.4, in paragraph (a)(6), remove the Note to
Paragraph (A)(6) following the introductory text.
Sec. 173.28 [Amended]
18. In Sec. 173.28, in paragraph (b)(7)(iv)(C), the word
``another'' is removed and the word ``Another'' is added in its place.
Sec. 173.33 [Amended]
19. In Sec. 173.33, in paragraph (c)(1)(iii), the wording ``at
115 deg.F. must'' is removed and the wording ``at 115 deg.F must'' is
added in its place.
Sec. 173.34 [Amended]
20. In Sec. 173.34, make the following changes:
a. In paragraph (d)(6), the word ``pyroforic'' is removed and the
word ``pyrophoric'' is added in its place.
b. In paragraph (e)(13) table, in the fifth entry, the wording
``ICC-26-240,1'' is removed and the wording ``ICC-26-240 \1\,'' is
added in its place.
c. In paragraph (e)(13) table, in the sixth entry, the wording
``ICC-26-2401, ICC-26-3001'' is removed and the wording ``ICC-26-240
\1\, ICC-26-300 \1\'' is added in its place.
Sec. 173.50 [Amended]
21. In Sec. 173.50, in paragraph (b)(6), the wording ``Division 1.6
\2\'' is removed and the wording ``Division 1.6 \2\'' is added in its
place.
Sec. 173.59 [Amended]
22. In Sec. 173.59, make the following changes:
a. In the definition Cases, cartridge, empty with primer, the
wording ``in which only the explosive component is the primer'' is
removed and the wording ``in which the only explosive component is the
primer'' is added in its place.
b. In the definition Detonator assemblies, non-electric, for
blasting, in the last sentence, the wording ``Detonators, nonelectric''
is removed and the wording ``Detonators, non-electric'' is added in its
place.
23. In Sec. 173.62, paragraph (a) is revised, in paragraph (c), in
the Table of Packing Methods, packing instruction 137 is revised to
read as follows:
Sec. 173.62 Specific packaging requirements for explosives.
(a) Except as provided in Sec. 173.7 of this subchapter, when the
Sec. 172.101 Table specifies that an explosive must be packaged in
accordance with this section, only packagings which conform to the
provisions of paragraphs (b) and (c) of this section or Sec. 173.7(e)
of this subchapter and the applicable requirements in Secs. 173.60 and
173.61 may be used unless otherwise approved by the Associate
Administrator.
* * * * *
(c) * * *
Table of Packing Methods
----------------------------------------------------------------------------------------------------------------
Packing instruction Inner packagings Intermediate packagings Outer packagings
----------------------------------------------------------------------------------------------------------------
* * * * * *
*
137 PARTICULAR PACKING REQUIREMENTS Bags................... Not necessary.......... Boxes.
OR EXCEPTIONS For UN 0059, 0439, plastics............... steel (4A).
0440 and 0441, when the shaped Boxes.................. aluminum (4B).
charges are packed singly, the fiberboard............. wood, natural, ordinary
conical cavity must face downwards Tubes.................. (4C1).
and the package marked ``THIS SIDE fiberboard............. wood, natural, sift
UP''. When the shaped charges are metal.................. proof walls (4C2).
packed in pairs, the conical plastics............... plywood (4D).
cavities must face inwards to Dividing partitions in reconstituted wood
minimize the jetting effect in the the outer packagings. (4F).
event of accidental initiation. fiberboard (4G).
* * * * * *
*
----------------------------------------------------------------------------------------------------------------
Sec. 173.133 [Amended]
24. In Sec. 173.133, in paragraph (a)(2)(i), in note 2 at the end
of the table, the reference ``172.203(m)(3)'' is removed and the
reference ``172.203(m)(2)'' is added in its place.
Sec. 173.166 [Amended]
25. In Sec. 173.166, in paragraph (a), in the last sentence, the
wording ``seat-belt pre-tensioner'' is removed and the italicized
wording ``seat-belt pre-tensioner'' is added in its place.
Sec. 173.181 [Amended]
26. In Sec. 173.181, in paragraph (a)(2), in the parenthetical at
the end of the paragraph, the wording ``(See Secs. 173.34(d)(7) and
177.838(h) of this subchapter.)'' is removed and the wording ``(See
Secs. 173.34(d)(6) and 177.838(h) of this subchapter.)'' is added in
its place.
Sec. 173.194 [Amended]
27. In Sec. 173.194, in paragraph (b)(1), in the second sentence,
the wording ``130 mm'' is removed and the wording ``0.30 mm'' is added
in its place.
Sec. 173.249 [Amended]
28. In Sec. 173.249, make the following changes:
a. In the introductory text, the last word ``table'' is removed and
the word ``Table'' is added in its place.
b. In paragraph (a), the specification ``105A-300W'' is removed and
the specification ``105A300W'' is added in its place.
Sec. 173.301 [Amended]
29. In Sec. 173.301, in paragraph (d)(3), in the first sentence,
the word ``Difluoroethylene'' is removed and the word
``difluoroethylene'' is added in its place.
[[Page 45184]]
Sec. 173.315 [Amended]
30. In Sec. 173.315, in paragraph (l)(6), the wording ``by
representative'' is removed and the wording ``by a representative'' is
added in its place.
Sec. 173.319 [Amended]
31. In Sec. 173.319, in paragraph (d)(2), in the Pressure Control
Valve or Relief Valve Setting Table, in the first column, in the last
entry, the wording ``(see Sec. 180.507(a)(3) of this subchapter)'' is
removed and the wording ``(see Sec. 180.507(b)(3) of this subchapter)''
is added in its place.
Sec. 173.403 [Amended]
32. In Sec. 173.403, make the following changes:
a. In the definition of ``Maximum normal operating pressure'', add
a period to the end of the sentence.
b. In the definition of ``Normal form Class 7 (radioactive)
material means'', the word ``means'' is removed and the word ``means''
is added in its place.
Sec. 173.433 [Amended]
33. In Sec. 173.433, in paragraph (b), the expression ``A \1\'' is
removed and the expression ``A 1'' is added in its place.
Sec. 173.435 [Amended]
34. In Sec. 173.435, in the table, make the following changes:
a. For the entry ``Am-242m'', in the sixth column, the expression
``5.4.1 x 10-3'' is removed and the expression ``5.41 x
10-3'' is added in its place.
b. For the entry ``Pa-231'', in the fifth column, the expression
``6 x 10-5'' is removed and the expression ``6 x
10-5'' is added in its place.
c. For the entry ``Si-32'', in the fourth column, the entry
``10800'' is removed and the entry ``1080'' is added in its place.
d. For the entry ``Sm-147'', in the seventh column, the expression
``8.510-10'' is removed and the expression ``8.5 x
10-10'' is added in its place.
e. For the entry ``Sm-147'', in the last column, the expression
``2.3;10-8'' is removed and the expression ``2.3 x
10-8'' is added in its place.
f. For the entry ``Sm-151'', in the seventh column, the expression
``9.710-1'' is removed and the expression ``9.7 x
10-1'' is added in its place.
g. For the entry ``Sn-126'', in the seventh column, the expression
``1.010-3'' is removed and the expression ``1.0 x
10-3'' is added in its place.
h. For the entry ``Sn-126'', in the last column, the expression
``2.810-2'' is removed and the expression ``2.8 x
10-2'' is added in its place.
i. For the entry ``Tb-157'', in the seventh column, the expression
``5.610-1'' is removed and the expression ``5.6 x
10-1'' is added in its place.
j. For the entry ``Tb-158'', in the seventh column, the expression
``5.6101'' is removed and the expression ``5.6 x
10-1'' is added in its place.
Sec. 173.469 [Amended]
35. In Sec. 173.469, the following changes are made:
a. In paragraph (c)(1)(v), the expression ``50 deg.C
5 (122 deg.F 9 deg.)'' is removed and the expression ``50
deg.C 5 deg. (122 deg.F 9 deg.)'' is added
in its place.
b. In paragraphs (d)(1) and (d)(2), the wording ``ISO 2919-1980(e),
`Sealed Radioactive Sources Classification' '' is removed and the
wording ``ISO 2919, ``Sealed Radioactive Sources-Classification'' (see
Sec. 171.7 of this subchapter)'' is added in its place each time it
appears.
PART 175--CARRIAGE BY AIRCRAFT
36. The authority citation for part 175 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
37. In Sec. 175.30, paragraphs (d)(1) and (d)(2) are revised to
read as follows:
Sec. 175.30 Accepting and inspecting shipments.
* * * * *
(d) * * *
(1) An ORM-D material packed in a freight container and offered for
transportation by one consignor; or
(2) Dry ice (carbon dioxide, solid).
* * * * *
Sec. 175.31 [Amended]
38. In Sec. 175.31, in paragraph (b)(1), the word ``Package'' is
removed and the word ``Packages'' is added in its place.
Sec. 175.75 [Amended]
39. In Sec. 175.75, in paragraph (a)(1), at the end of the
sentence, the colon is removed and a semicolon is added in its place.
Sec. 175.90 [Amended]
40. In Sec. 175.90, in paragraph (d)(2), the word ``safety'' is
removed and the word ``safely'' is added in its place.
PART 176--CARRIAGE BY VESSEL
41. The authority citation for part 176 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
42. In Sec. 176.2, the definition ``Commandant (G-MTH)'' is removed
and the following definition is added in the appropriate alphabetical
sequence to read as follows:
Sec. 176.2 Definitions.
* * * * *
Commandant (G-MSO), USCG means the Chief, Office of Operating and
Environmental Standards, United States Coast Guard, Washington DC
20593-0001.
* * * * *
Sec. 176.30 [Amended]
43. In Sec. 176.30, in paragraph (a)(5) introductory text, the
semicolon is removed and a colon is added in its place.
Sec. 176.63 [Amended]
44. In Sec. 173.63, in paragraph (b), in the second sentence, add a
comma between the words ``hatch'' and ``companionway''.
Sec. 176.74 [Amended]
45. In Sec. 176.74, in paragraph (c), the parenthetical ``(except
Class 9 (miscellaneous hazardous) materials material)'' is removed and
the parenthetical ``(except Class 9 (miscellaneous hazardous material)
materials'' is added in its place.
Sec. 176.76 [Amended]
46. In Sec. 176.76, make the following changes:
a. In paragraph (d), the parenthetical ``(See Sec. 176.79.)'' is
removed.
b. In paragraph (f)(2), in the first sentence, the wording
``Flammable liquids or gases, Combustible'' is removed and the wording
``flammable liquids or gases, combustible'' is added in its place.
47. In Sec. 176.80, revise the section heading to read as follows:
Sec. 176.80 Applicability.
* * * * *
Sec. 176.83 [Amended]
48. In Sec. 176.83, make the following changes:
a. In paragraphs (a)(6), (a)(7) introductory text, and (b)
introductory text, the wording ``Sec. 172.101 table'' is removed and
the wording ``Sec. 172.101 Table'' is added in its place.
b. In paragraph (c)(2)(iii), the wording ``(i.e., in different
compartments accepted'' is removed and the wording ``(i.e., in
different compartments) is acceptable'' is added in its place.
c. In paragraph (c)(2)(iv), in the last sentence, the wording
``stowed ``on deck, and'' is removed and the wording
[[Page 45185]]
``stowed ``on deck'', and'' is added in its place.
Sec. 176.84 [Amended]
49. In Sec. 176.84, make the following changes:
a. In paragraph (a), the wording ``Sec. 172.101 table'' is removed
and the wording ``Sec. 172.101 Table'' is added in its place.
b. In paragraph (c)(2), in the text preceding the table, the
wording ``Sec. 172.101 table'' is removed and the wording
``Sec. 172.101 Table'' is added in its place.
50. In Sec. 176.88, the section heading is revised to read as
follows:
Sec. 176.88 Applicability.
* * * * *
51. In Sec. 176.95, the section heading is revised to read as
follows:
Sec. 176.95 Applicability.
* * * * *
52. In Sec. 176.112, the section heading is revised to read as
follows:
Sec. 176.112 Applicability.
* * * * *
Sec. 176.133 [Amended]
53. In Sec. 176.133, the period between the parenthetical ``(8.2
feet)'' and the word ``whatever'' is removed and a comma is added in
its place.
Sec. 176.136 [Amended]
54. In Sec. 176.136 make the following changes:
a. In paragraph (b), in the first sentence, the comma between the
words ``living'' and ``accommodation'' is removed.
b. In paragraph (c), in the last sentence, the word ``pening'' is
removed and the word ``opening'' is added in its place.
Sec. 176.137 [Amended]
55. In Sec. 176.137, in paragraph (c), the comma is removed between
the expression ``3.1 m3'' and the parenthetical ``(110 cubic
feet)''.
Sec. 176.194 [Amended]
56. In Sec. 176.194, in paragraph (f), in the last sentence, the
period between the words ``deck'' and ``a'' is removed and a comma is
added in its place.
Sec. 176.210 [Amended]
57. In Sec. 176.210, the wording ``radiant heat which, including
the direct rays of the sun by'' is removed and the wording ``radiant
heat, including the direct rays of the sun, by'' is added in its place.
Sec. 176.340 [Amended]
58. In Sec. 176.340, in paragraph (c), the wording ``Commandant,
USCG (G-MSO)'' is removed and the wording ``Commandant (G-MSO), USCG''
is added in its place.
Sec. 176.415 [Amended]
59. In Sec. 176.415, in paragraph (c)(4), in the last sentence, the
word ``spice'' is removed and the word ``splice'' is added in its
place.
PART 177--CARRIAGE BY PUBLIC HIGHWAY
60. The authority citation for part 177 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Sec. 177.840 [Amended]
61. In Sec. 177.840, in paragraph (e), make the following changes:
a. A colon is added immediately following the word ``equipped''.
b. The word ``and'' is added immediately following the semicolon at
the end of paragraph (e)(1).
Sec. 177.848 [Amended]
62. In Sec. 177.848, in paragraph (g)(3)(iv), the wording ``means
Sec. 177.835(g)'' is removed and the wording ``means `see
Sec. 177.835(g)' '' is added in its place.
PART 178--SPECIFICATIONS FOR PACKAGINGS
63. The authority citation for part 178 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Sec. 178.35 [Amended]
64. In Sec. 178.35, in paragraph (f)(1)(iv), in the expressions
following the introductory text, the wording ``xy = symbol of
manufacturer'' is removed and the wording ``XY = symbol of
manufacturer'' is added in its place.
Sec. 178.36 [Amended]
65. In Sec. 178.36, in paragraph (j), in the first sentence, the
wording ``out or each'' is removed and the wording ``out of each'' is
added in its place.
Sec. 178.38 [Amended]
66. In Sec. 178.38, in paragraph (j), in the first sentence, the
wording ``out or each'' is removed and the wording ``out of each'' is
added in its place.
Sec. 178.39 [Amended]
67. In Sec. 178.39, in paragraph (j), in the first sentence, the
wording ``out or each'' is removed and the wording ``out of each'' is
added in its place.
Sec. 178.44 [Amended]
68. In Sec. 178.44, in paragraph (l), in the first sentence, the
wording ``out or each'' is removed and the wording ``out of each'' is
added in its place.
Sec. 178.45 [Amended]
69. In Sec. 178.45, in paragraph (j)(4), in the first sentence, the
wording ``10 mm ×'' is removed and the wording ``10 mm times'' is
added in its place.
Sec. 178.50 [Amended]
70. In Sec. 178.50, in paragraph (d) introductory text, in the
fourth sentence, the wording ``18 inch long'' is removed and the
wording ``18 inches long'' is added in its place.
Sec. 178.51 [Amended]
71. In Sec. 178.51, in paragraph (g)(1), in the first sentence, the
wording ``table I'' is removed and the wording ``table 1'' is added in
its place.
Sec. 178.318-3 [Amended]
72. In Sec. 178.318-3, the wording ``prescribed in Sec. 173.24 of
this subchapter'' is removed and the wording ``prescribed in
Sec. 178.2(b)'' is added in its place.
Sec. 178.813 [Amended]
73. In Sec. 178.813, make the following changes:
a. In paragraph (a), the wording ``intended to contain liquids or
intended to contain solids that are loaded or discharged under
pressure'' is removed and the wording ``intended to contain solids that
are loaded or discharged under pressure or intended to contain
liquids'' is added in its place.
b. In paragraph (d), the wording ``intended to contain liquids or
intended to contain solids that are loaded or discharged under
pressure'' is removed and the wording ``intended to contain solids that
are loaded or discharged under pressure or intended to contain
liquids'' is added in its place.
Sec. 178.814 [Amended]
74. In Sec. 178.814, in paragraph (a), the wording ``intended to
contain liquids or intended to contain solids loaded or discharged
under pressure'' is removed and the wording ``intended to contain
solids that are loaded or discharged under pressure or intended to
contain liquids'' is added in its place.
[[Page 45186]]
PART 179--SPECIFICATIONS FOR TANK CARS
75. The authority citation for part 179 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Sec. 179.2 [Amended]
76. In Sec. 179.2, in the definition of ``NPT'', the word ``Tape''
is removed and the word ``Taper'' is added in its place.
Sec. 179.100 [Amended]
77. In Sec. 179.100 heading, the word ``specification'' is removed
and the word ``specifications'' is added in its place.
Sec. 179.100-7 [Amended]
78. In Sec. 179.100-7, in paragraph (b) table, in column 2 heading,
the wording ``welded condition \3\ \6\'' is removed and the wording
``welded condition \3\ \4\'' is added in its place.
Sec. 179.100-14 [Amended]
79. In Sec. 179.100-14, in paragraph (a) introductory text, in the
last sentence, the period following the word ``requirements'' is
removed and a colon is added in its place.
Sec. 179.100-18 [Amended]
80. In Sec. 179.100-18, in paragraph (c), in the last sentence, the
word ``specifications for Tank Cars, appendix W'' is removed and the
wording ``Specifications for Tank Cars, appendix W (See Sec. 171.7 of
this subchapter)'' is added in its place.
Sec. 179.101 [Amended]
81. The second Sec. 179.100, which immediately follows
Sec. 179.100-20, is redesignated as ``Sec. 179.101''.
Sec. 179.101-1 [Amended]
82. In Sec. 179.101 table, in note 6, the title ``AAR
specifications for tank cars, Appendix E, E4.01'' is removed and the
title ``AAR Specifications for Tank Cars, appendix E, E4.01 (See
Sec. 171.7 of this subchapter)'' is added in its place.
Sec. 179.102-4 [Amended]
83. In Sec. 179.102-4, in paragraph (a) introductory text, the
wording ``paragraph (b)(2) of this section'' is removed and the wording
``paragraph (a)(2) of this section'' is added in its place.
Sec. 179.103-5 [Amended]
84. In Sec. 179.103-5, in paragraph (b)(4), in the third sentence,
the measurement ``15inches'' is removed and the measurement ``15
inches'' is added in its place.
Sec. 179.200-1 [Amended]
85. In Sec. 179.200-1 heading, the wording ``requirements of
Secs. 179.200, 179.201, and when applicable Sec. 179.202'' is removed
and the wording ``requirements of Secs. 179.200 and 179.201'' is added
in its place.
Sec. 179.200-7 [Amended]
86. In Sec. 179.200-7, make the following changes:
a. In paragraph (c) table, in column 2 heading, the wording
``welded condition 3 6'' is removed and the wording ``welded
condition 3 4'' is added in its place.
b. In paragraph (h), in the last sentence, the word
``Specification'' is removed and the word ``Specifications'' is added
in its place, and the wording ``(See Sec. 171.7 of this subchapter)''
is added after the wording ``M4.05''.
Sec. 179.200-9 [Amended]
87. In Sec. 179.200-9, make the following changes:
a. In paragraph (a), in the first sentence, the section
``Sec. 179.2011-1'' is removed and the section ``Sec. 179.201-1'' is
added in its place.
b. In paragraph (b), in the first sentence, the word
``construction'' is removed and the word ``constructing'' is added in
its place.
Sec. 179.200-11 [Amended]
88. In Sec. 179.200-11, the reference ``Sec. 179.201.1'' is removed
and the reference Sec. 179.201-1'' is added in its place.
Sec. 179.200-14 [Amended]
89. In Sec. 179.200-14, make the following changes:
a. In paragraph (c), in the third sentence, the word
``Specification'' is removed and the word ``Specifications'' is added
in its place.
b. In paragraph (c), in the last sentence, the measurement ``1-
inch'' is removed and the measurement ``1 inch'' is added in its place.
c. In paragraph (e)(2), in the first sentence, the wording
``diameter of the dome shall'' is removed and the wording ``diameter of
the dome shell'' is added in its place.
Sec. 179.201-3 [Amended]
90. In Sec. 179.201-3, in paragraphs (a)(1) and (a)(2), the degree
symbol `` deg.'' is added immediately following the number ``45'' each
time it appears.
Sec. 179.201-4 [Amended]
91. In Sec. 179.201-4, the word ``specification'' is removed and
the word ``Specification'' is added in its place.
Sec. 179.201-6 [Amended]
92. In Sec. 179.201-6, in paragraph (d), the wording ``DOT 103ANW''
is removed and the wording ``DOT-103ANW'' is added in its place.
Sec. 179.220-7 [Amended]
93. In Sec. 179.220.7, in paragraph (c) table, make the following
changes:
a. In column 2 heading, the wording ``welded condition
3 6'' is removed and the wording ``welded condition
3 4'' is added in its place.
b. Notes \4\ and \5\ are removed.
c. Note \6\ is redesignated as Note \4\.
Sec. 179.300-6 [Amended]
94. In Sec. 179.300-6, in paragraph (a), in the definitions
following the formula, in ``S'', the wording ``as prescribed
Sec. 179.300-7'' is removed and the wording ``as prescribed in
Sec. 179.300-7'' is added in its place.
Sec. 179.400-4 [Amended]
95. In Sec. 179.400-4, in the definitions following the formula in
paragraph (a)(5), make the following changes:
a. In definition ``90'', a semicolon is added following the period.
b. In definition ``ts'', a semicolon is added following
the period.
Sec. 179.400-17 [Amended]
96. In Sec. 179.400-17, in paragraph (a)(1), a period is added at
the end of the last sentence following the word ``jacketed''.
Sec. 179.500-3 [Amended]
97. In Sec. 179.500-3, in paragraph (d), the wording ``at 130 F''
is removed and the wording ``at 130 deg.F'' is added in its place.
PART 180--CONTINUING QUALIFICATION AND MAINTENANCE OF PACKAGINGS
98. The authority citation for part 180 continues to read as
follows:
Authority: 49 U.S.C. 5101-5127; 49 CFR 1.53.
Sec. 180.352 [Amended]
99. In Sec. 180.352, in paragraph (b)(1), the wording ``intended to
contain liquids or solids that are loaded or discharged under
pressure'' is removed and the wording ``intended to contain solids that
are loaded or discharged
[[Page 45187]]
under pressure or intended to contain liquids'' is added in its place.
Sec. 180.415 [Amended]
100. In Sec. 180.415, in paragraph (b), in the last sentence, the
wording ``cargo received'' is removed and the wording ``cargo tank
received'' is added in its place.
Sec. 180.511 [Amended]
101. In Sec. 180.511, in paragraph (e), the wording ``the lining or
conforms'' is removed and the wording ``the lining or coating
conforms'' is added in its place.
Sec. 180.519 [Amended]
102. In Sec. 180.519, in paragraph (b)(1), in the second sentence,
the word ``far'' is removed and the word ``for'' is added in its place.
Issued in Washington, DC, on August 15, 2001, under authority
delegated in 49 CFR part 1.
Stacey L. Gerard,
Acting Deputy Administrator.
[FR Doc. 01-21003 Filed 8-27-01; 8:45 am]
BILLING CODE 4910-60-P