[Federal Register Volume 66, Number 175 (Monday, September 10, 2001)]
[Notices]
[Pages 47043-47044]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 01-22625]


-----------------------------------------------------------------------

NUCLEAR REGULATORY COMMISSION


Draft Regulatory Guide; Issuance, Availability

    The Nuclear Regulatory Commission has issued for public comment a 
proposed revision of a guide in its Regulatory Guide Series. This 
series has been developed to describe and make available to the public 
such information as methods acceptable to the NRC staff for 
implementing specific parts of the NRC's regulations, techniques used 
by the staff in evaluating specific problems or postulated accidents, 
and data needed by the staff in its review of applications for permits 
and licenses.
    The draft guide, temporarily identified by its task number, DG-1109 
(which should be mentioned in all correspondence concerning this draft 
guide), is ``Laboratory Investigations of Soils and Rocks for 
Engineering Analysis and Design of Nuclear Power Plants.'' This draft 
guide is a proposed Revision 1 of Regulatory Guide 1.138, and it is 
being revised to describe laboratory investigations and testing 
practices that are acceptable to the NRC staff for determining soil and 
rock properties and characteristics needed for engineering analysis and 
design for foundations and earthworks for nuclear power plants. The 
state of the art of laboratory testing practices of soils and rocks is 
reflected in existing national standards, and this guide recommends and 
references such standards where appropriate.
    This draft guide has not received complete staff approval and does 
not represent an official NRC staff position.
    Comments may be accompanied by relevant information or supporting 
data. Written comments may be submitted to the Rules and Directives 
Branch, Office of Administration, U.S. Nuclear Regulatory Commission, 
Washington, DC 20555. Copies of comments received may be examined at 
the NRC Public Document Room, 11555 Rockville Pike,

[[Page 47044]]

Rockville, MD. Comments will be most helpful if received by December 
10, 2001.
    You may also provide comments via the NRC's interactive rulemaking 
Web site through the NRC home page 
(http://www.nrc.gov). This site provides the availability to upload 
comments as files (any format) if your web browser supports that 
function. For information about the interactive rulemaking Web site, 
contact Ms. Carol Gallagher, (301) 415-5905; e-mail [email protected]. For 
information about the draft guide and the related documents, contact 
Mr. J. Philip at (301)415-6211; e-mail [email protected].
    Although a time limit is given for comments on this draft guide, 
comments and suggestions in connection with items for inclusion in 
guides currently being developed or improvements in all published 
guides are encouraged at any time.
    Regulatory guides are available for inspection at the NRC's Public 
Document Room, 11555 Rockville Pike, Rockville, MD; the PDR's mailing 
address is USNRC PDR, Washington, DC 20555; telephone (301)415-4737 or 
(800)397-4205; fax (301)415-3548; e-mail [email protected]. Requests for 
single copies of draft or final guides (which may be reproduced) or for 
placement on an automatic distribution list for single copies of future 
draft guides in specific divisions should be made in writing to the 
U.S. Nuclear Regulatory Commission, Washington, DC 20555, Attention: 
Reproduction and Distribution Services Section; or by e-mail to 
[email protected]; or by fax to (301)415-2289. Telephone requests 
cannot be accommodated. Regulatory guides are not copyrighted, and 
Commission approval is not required to reproduce them.

(5 U.S.C. 552(a))


    Dated at Rockville, Maryland, this 30th day of August 2001.

    For the Nuclear Regulatory Commission.
Michael E. Mayfield,
Director, Division of Engineering Technology, Office of Nuclear 
Regulatory Research.
[FR Doc. 01-22625 Filed 9-7-01; 8:45 am]
BILLING CODE 7590-01-P