[Federal Register Volume 70, Number 126 (Friday, July 1, 2005)]
[Proposed Rules]
[Page 38073]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 05-12947]
-----------------------------------------------------------------------
ENVIRONMENTAL PROTECTION AGENCY
40 CFR Parts 52 and 81
[Docket No. R10-OAR-2004-WA-0003; FRL-7927-3]
Approval and Promulgation of Air Quality Implementation Plans;
Spokane PM10 Nonattainment Area Limited Maintenance Plan and
Redesignation Request
AGENCY: Environmental Protection Agency (EPA).
ACTION: Proposed rule.
-----------------------------------------------------------------------
SUMMARY: EPA is proposing to approve revisions to the Limited
Maintenance Plan for the Spokane nonattainment area (NAA) in Washington
and grant the request by the State to redesignate the area from
nonattainment to attainment for PM10. On November 30, 2004, the State
of Washington submitted a Limited Maintenance Plan (LMP) for the
Spokane nonattainment area (NAA) for approval and concurrently
requested that EPA redesignate the Spokane NAA to attainment for the
National Ambient Air Quality Standards (NAAQS) for particulate matter
with an aerodynamic diameter less than or equal to a nominal 10
micrometers (PM10). In 1997, EPA approved Washington's moderate area
plan for the Spokane NAA for all PM10 sources except windblown dust. In
this action, EPA is also proposing to approve the remaining elements of
the Spokane NAA moderate area plan for windblown dust sources.
DATES: Comments must be received on or before August 1, 2005.
ADDRESSES: Submit your comments, identified by Docket ID No. R10-OAR-
2004-WA-0003, by one of the following methods:
Federal eRulemaking Portal: http://www.regulations.gov.
Follow the on-line instructions for submitting comments.
Agency Web site: http://www.epa.gov/edocket. EDOCKET,
EPA's electronic public docket and comment system, is EPA's preferred
method for receiving comments. Follow the on-line instructions for
submitting comments.
Mail: Gina Bonifacino, Office of Air, Waste and Toxics,
OAWT-107 EPA, Region 10, 1200 Sixth Ave., Seattle, Washington 98101.
Hand Delivery: EPA, Region 10 Mail Room, 9th Floor, 1200
Sixth Ave., Seattle, Washington 98101. Attention: Gina Bonifacino,
Office of Air, Waste and Toxics, OAWT-107. Such deliveries are only
accepted during normal hours of operation, and special arrangements
should be made for deliveries of boxed information.
Please see the direct final rule which is located in the Rules
section of this Federal Register for detailed instructions on how to
submit comments.
FOR FURTHER INFORMATION CONTACT: Gina Bonifacino at telephone number:
(206) 553-2970, e-mail address: [email protected], fax number:
(206) 553-0110, or the above EPA, Region 10 address.
SUPPLEMENTARY INFORMATION: For further information, please see the
direct final action, of the same title, which is located in the Rules
section of this Federal Register. EPA is approving the State's SIP
revision as a direct final rule without prior proposal because EPA
views this as a noncontroversial SIP revision and anticipates no
adverse comments. A detailed rationale for the approval is set forth in
the preamble to the direct final rule. If EPA receives no adverse
comments, EPA will not take further action on this proposed rule.
If EPA receives adverse comments, EPA will withdraw the direct
final rule and it will not take effect. EPA will address all public
comments in a subsequent final rule based on this proposed rule. EPA
will not institute a second comment period on this action. Any parties
interested in commenting on this action should do so at this time.
Please note that if we receive adverse comment on an amendment,
paragraph, or section of this rule and if that provision may be severed
from the remainder of the rule, EPA may adopt as final those provisions
of the rule that are not the subject of an adverse comment.
Dated: June 17, 2005.
Daniel D. Opalski,
Acting Regional Administrator, Region 10.
[FR Doc. 05-12947 Filed 6-30-05; 8:45 am]
BILLING CODE 6560-50-P